Custom Metal Gates, Wickets and Fences

We manufacture metal gates, wicket gates and fence sections at our own facility in Kyiv. The frame is welded from profile tube; the infill is your choice: metal pickets, louvres, profiled sheet, forged bar or perforated sheet with your own pattern. Everything is powder coated, so the finish lasts for years without touch-ups.

Gates we build

• Swing gates — the classic two-leaf layout on hinges. Simplest to install and service, works without electricity. Available with a wicket built into a leaf or as a separate one.
• Sliding gates — the leaf runs along the fence on a cantilever beam. No swing clearance needed, unaffected by snow, ideal for automation.
• Garage gates — swing metal garage gates, insulated or not, with locks and bolts.
• Wicket gates — standalone or matched to the gates, in the same design and colour.

Fences: infill options

Fence sections are made in the same style as the gates, so the whole boundary looks consistent:

• Metal pickets — vertical slats with a gap, or staggered on both sides for full privacy. No wind load, light appearance.
• Louvres — angled horizontal slats: the yard is hidden from the street while air and light pass through.
• Perforated sheet — a solid sheet with a laser-cut pattern of your choice, up to an ornament or a logo. Privacy without a blank wall.
• Profiled sheet — the most economical solid option on a welded frame.
• Combined — solid bottom with an open top; bar inserts; frames for clinker or timber.

Structure and finish

The frame is 40×20…60×40 mm profile tube; posts are 60×60 or 80×80 mm with weld-in plates for the hinges. Parts are cut on the laser, so the joints are tight and the weld seams are even and dressed. Hardware — adjustable hinges, bolts, stops and locks to match how you will use the gate.

The finish is powder coating in any RAL colour, including textured and metallic. Unlike ordinary enamel, a powder finish is baked in an oven and does not peel in sun or rain. For coastal or very damp sites we galvanize first.

Automation

We prepare sliding and swing gates for drives: a reinforced frame, mounting pads for the operator and cable routing. You can fit the drive right away or later — the structure is already engineered for it.

What metal gates cost

The price depends on the opening size, the type (sliding gates cost more than swing gates because of the beam and hardware), the infill and the finish. The most accurate way to find out is to send the opening width, the preferred type and a photo of the site: we will quote within one business day. For a rough figure, use the online calculator.

Full cycle in one workshop

Cutting, bending, welding, coating and installation — we do it all ourselves, without handing the product to subcontractors. That is how we keep both the schedule and the geometry: the gates do not sag, the wicket does not catch the frame, the gaps stay even. We survey sites across Kyiv and the region and install with our own posts and embedded plates.

Describe the opening and the look you want in the form below — we will propose a design and finish, and quote the cost.